|
|
 150 C
Material:
Harsons Ceiling type 150C distinguishes itself from the other types because of its smooth, closed appearance. The panels about each other with a narrow A-groove. They are installed to carrier profiles and can be simply demounted individually, by inserting a plain strip between the panels.
As with all Harsons Ceilings, the 150C can be applied in all types of buildings and because of their closed appearance they are particularly suitable for domestic applications: corridors, offices etc.
Panels: 150mm wide x 15mm deep with beveled groove between panels, made out of 0.50mm thick. aluminium alloy M 3105/5050 or 0.5mm thick. galvanised steel.
(Colour according to Harsons colour chart and availability)
Panel lengths upto approx 5 mtrs.
When perforated, hole diameters are 2mm on 5mm centres (standard) or 1mm on 2.5mm centres (micro-perforated), the holes representing 15% of the perforated area (150C only).
Panel Carriers: 32mm wide, 39mm deep made out of 0.91mm aluminium of 0.6mm galvanised steel, with prongs to hold panel in a module of 150mm.
Suspension: By means of G.I. rod hangers and suspension clips.
Panel Span: 1.3m max. with insulation, 1.5m max. without insulation.
Carrier Span: 1.3m max. spacing of suspension rods.
Finish:
Coil Coated: Panels will be finished on exposed side with 20 microns polyester coil coating over primer and on the rear side with a wash coat.
Powder Coated: Panels will be finished on the exposed side with 50 microns polyester powder paint.
|
|
|
